Please login or register.

Login with username, password and session length

Author Topic: www.NewToX10.com  (Read 34359 times)

x10marko

  • Full Member
  • ***
  • Helpful Post Rating: 11
  • Posts: 57
www.NewToX10.com
« on: June 14, 2006, 08:30:15 PM »

Hello everyone!

Here I am again; today I'd like to ask you to take a look at my latest project: www.NewToX10.com

Every piece of input is appreciated! You can post right here or shoot me an email: markow@x10.com

 :)

Also:

Make sure you check out my tips page: www.NewToX10.com/markos_tips.html
I hope some of you will help me fill that page with tips and hints around X10 products.

Thank you all!

 ;)
Logged

steven r

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 74
  • Posts: 2189
  • Halloween with X10
Re: www.NewToX10.com
« Reply #1 on: June 14, 2006, 11:59:13 PM »

Again great work.

Don't forget that if a newbie buys your Motion Sensor Lighting Package they'll need something to use to program the socket rocket. You don't want someone complaining because they couldn't program it. You might offer a package with some kind of controller box with it. Well I suppose if everything defaults to A1 it wouldn't be too bad by itself.
Logged
BVC let's me tell my camera where to go!
:) Murphy is my beta testing pal. He helps me find problems whether I like it or not. :)

x10marko

  • Full Member
  • ***
  • Helpful Post Rating: 11
  • Posts: 57
Re: www.NewToX10.com
« Reply #2 on: June 15, 2006, 03:25:12 PM »

Thanks guys! I appreciate your input.

@SteveR
Very valuable info, thanks! We should probably make the solution to this issue more obvious. I will incorporate it into my tips.

The solution is quite simple:

1. Program motion sensor to desired code first
2. Program transceiver to same code
3. Screw in Socket Rocket
4. Push the House/On button on the motion sensor 3 times.

This will set the "listening" socket rocket to the desired code. The same procedure applies if you want to change the code, simply unscrew the socket rocket and repeat steps 1-4.

Thanks again, and please keep checking and giving me input on how to improve the site. We just started it, so there is a lot more to come.

 ;)
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.